DIY A/V Shelf
In no way do I take credit for this design, I merely documented the process and created this How-To.
This is a fairly simple afternoon project, I assembled it with ease in my dorm room.
Materials
5 - 3/4" x 18" x 24" MDF
3 - 3/8" x 36" All Thread rods
3 - 3/8" Zinc Acorn nuts
30 - 3/8" Zinc nuts
30 - 3/8" Zinc washers
Tools:
Drill
1/2" Drill bit
level
Measuring device
Gather all of your materials.
Run the All thread through the bottom shelf. Attach a washer and nut as shown.
Then screw on an acorn nut on each rod.
Attach a washer/nut combination on each side of each shelf, as shown.
Finsh by leveling each shelf and enjoy!
